Valvesealer | Sealing with integrity

Back to Products

Valvesealer Gearbox Protect
Valvesealer Gearbox protect plates onto metal surfaces to withstand heat, pressure and wear in corrosive environments. Valvesealer Gearbox protect is water repellent, chemically resistant and non-gumming. It features a synthetic, water-resistant base that will decompose at extreme temperatures, providing dry film lubrication.
Recommended Uses
Valvesealer Gearbox protect may be used on heavy, slow-speed slide applications. It is outstanding for journal and loose-tolerance bearings, but is not recommended for use with close-tolerance bearings where binding could occur due to plating on the metal surfaces. The bearings should not be over- packed as Valvesealer Gearbox protect works best as a thin film lubricant.
Typical Characteristics

Appearance	Silver, smooth
NLGI	0
Penetration (ASTM D217)	345-370
Worked Penetration, 60x (ASTM D217)	345-370
Base Oil	Synthetic hydrocarbon
Base Oil Viscosity	230 cSt at 40°C
Base Oil Viscosity	22 cSt at 100°C
Base Oil Viscosity Index	116
Base Oil Pour Point	-22°F (-30°C)
Thickener	Inorganic
Additives	Dry film lubricants
Specific Gravity	1.0
Density (lb/gal)	8.1
Dropping Point (ASTM D566)	>500°F (260°C)
Flash Point	248°F (120°C)
Temperature Range	-40°F to 2200°F (-40°C to 1200°C)
Four-ball EP Weld Point (ASTM D2596)	160 kgf

DO NOT USE ON OXYGEN SERVICES.

Packing Size	Part Number
5 Quarter Can (9 LBS)	VS-VGP-5Q
5 Gallon Pail (36 LBS)	VS-VGP-5G