Valvesealer | Sealing with integrity

Back to Products

Valvesealer cleaner master
Valvesealer cleaner master is a formulated multi-ingredient, semi-fluid combination of penetrants and lubricants designed to dissolve and cut residual gums, laquer deposits, inert solids and corrosion deposits that make valves non-functioning and hard to operate.
Although not all valves are recoverable with cleaner master, with periodic use many operators have found that valves remain operable through years of usage under severe conditions with.
Recommended Uses
For neglected valves. Helps to free frozen and non-sealing valves so that routine maintenance can be commenced. When the valve is again operational Valvesealer cleaner master must be purged from the valve by injecting the recommended Valvesealer cleaner master Synthetic Lubricant/Sealant for the particular service of the valve.
Typical Characteristics

Appearance	Black, smooth

NLGI	1
Penetration (ASTM D217)	300-330
Thickener	Inorganic
Specific Gravity	1.1
Density (lb/gal)	8.8
Flash Point	196°F (91°C)
Temperature Range	-40°F to 400°F (-90°C to 204°C)

DO NOT USE ON OXYGEN SERVICES.

Packing Size	Part Number
5 Quarter Can (9 LBS)	VS-CM-5Q
5 Gallon Pail (36 LBS)	VS-CM-5G